Fixation Strength of Modified Iliac Screw Trajectory Compared to Traditional Iliac and S2 Alar-Iliac Trajectories: A Cadaveric Study.

Document Type

Article

Publication Date

7-20-2021

Publication Title

World Neurosurg

Keywords

washington; seattle; swedish neuro

Abstract

OBJECTIVE: Traditional iliac (TI) screws require extensive dissection, involve offset-connectors, and have prominent screw heads that may cause patient discomfort. S2 alar-iliac (S2AI) screws require less dissection, do not need offset-connectors, and are less prominent. However, the biomechanical consequences of S2AI screws crossing the alar-iliac joint is unknown. The present study investigates the fixation strength of a modified iliac (MI) screw, which has a more medial entry point and reduced screw prominence, but does not cross the alar-iliac joint.

METHODS: Eighteen sacropelvic spines were divided into 3 groups (n = 6): TI, S2AI, and MI. Each specimen was fixed unilaterally with S1 pedicle screws and pelvic fixation according to its group. Screws were loaded at ±10Nm at 3Hz for 1000 cycles. Motion of each screw and rod strain above and below the S1 screw was measured.

RESULTS: Toggle of the S1 screw was lowest for the TI group, followed by the MI and S2AI groups, but there were no significant differences (p = .421). Toggle of the iliac screw relative to the pelvis was also lowest for the TI group, followed by the MI group, and was greatest for the S2AI group, without significant differences (p = .179). Rod strain was similar across all groups.

CONCLUSIONS: No statistically significant differences were found between the TI, S2AI, and MI techniques with regard to screw toggle or rod strain. Advantages of the MI screw include its lower profile and a medialized starting point eliminating the need for offset-connectors.

Clinical Institute

Neurosciences (Brain & Spine)

Department

Surgery

Department

Neurosciences

Share

COinS